Table of Contents
Advertisement
Connection to other equipment
1. Connecting to other equipment
Attention: Preparation:
• Disconnect all equipment from the AC-supply, to prevent any possible damage.
• Make the necessary connections.
• Make sure all connections are safe & secure before reconnecting your equipment the AC-supply.
Pls connect your satellite-receiver or DVD player via SCART. Make sure your SCART cable's cross-
section is at least 1 cm or more. SCART cables with less thickness may cause visible noise.
Pls make the following settings inside your receiver's / DVD-player's setup-menu:
Video signal: RGB
TV-Format: 16:9
If you miss to make these settings properly, picture quality will be inferior and parts of the picture
might be missing. This is not a fault of this TV-set.
In case you need help to make this adjustment with your satellite-receiver / DVD-player, pls consult
the related instructions or contact the supplier or maker of those apparatus for support.
Pls use the satellite's remote-control handset to select Teletext or desired TV-station. Generally it is
not possible to store satellite TV-stations into a standard TV.
If the TV does not automatically switch to AV-1, please select INPUT AV1 manually, as seen on page
12.
Satellite antenna
2. Connecting a DVD player
TV (Back side view)
(SCART cable, not supplied)
56
51B0346B_ENG.indd 56
51B0346B_ENG.indd 56
Video recorder
Satellite
receiver
VCR
TV
DVD Player
TV
(All illustrated SCART cables and
antenna cables are not supplied)
6/13/08 10:08:01 AM
6/13/08 10:08:01 AM
Advertisement
Table of Contents
