Table of Contents
Advertisement
51B0346B_ENG.indd 37
51B0346B_ENG.indd 37
Zooming/Locating desired scene
Zooming (DVD/VCD)
This unit will allow you to zoom in on the frame image. You can
then make selections by switching the position of the frame.
1
Press ZOOM during playback.
The centre part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM
(x 1.5) and
3 (x 2.0).
2
Press
/
/
You may move the frame from the centre position to UP,
DOWN, LEFT or RIGHT direction.
3
In the zoom mode, press ZOOM repeatedly to return to a
1:1 view (
Off).
Note:
•
You can select the Pause or Slow in the zoom mode.
•
Some discs may not respond to zoom feature.
Locating desired scene (DVD/VCD/Audio CD)
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to playback. In the case of VCD/Audio
CD discs, time and track are used to locate the desired point to
playback. To check the title, chapter/track and time, press .
1
Press JUMP during playback
or resume stop mode.
2
Press
or
"Title/Track", "Chapter" or
"Time".
3
Press Number buttons (0–9)
to input the number.
•
If you input a wrong number,
press CANCEL.
•
Refer to the package
supplied with the disc to
check the numbers.
4
Press ENTER. Playback starts.
•
When you change the title, playback starts from Chapter
1 of the selected title.
•
Some discs may not work in the above operation.
Note:
•
In case of the Audio CD and Video-CD, only Track and
Time can be selected.
•
In case of the Video-CD playback with PBC, the JUMP
does not work. Turn off the PBC (see page 33).
/
to view a different part of the frame.
Title
Chapter
Time
to select the
Title
Chapter
Time
Title
Chapter
Time
1
1(x 1.3),
2
Jump
Jump
Jump
12
37
6/13/08 10:07:43 AM
6/13/08 10:07:43 AM
Advertisement
Table of Contents
