For 64-Bit Wep, You Need To Enter 10 Keys. This Network Key - Belkin F5D7050 User Manual

Troubleshooting Troubleshooting
Installation CD-ROM does not start Wireless Setup Utility.
If the CD-ROM does not start the Wireless Setup Utility
automatically, it could be that the computer is running other
applications that are interfering with the CD drive.
If the Wireless Setup Utility screen does not appear within 15–20
seconds, open up your CD-ROM drive by double-clicking on
the "My Computer" icon. Next, double-click on the CD-ROM
drive that the Installation CD has been placed in to start the
installation. Then double-click on the folder named "Files". Next,
double-click on the icon named "setup.exe".
Power LED does not come ON; Adapter is not working.
If the LED indicators are not ON, the problem may be that the
Adapter is not connected or installed properly.
Verify that the Adapter's USB cable (attached to desktop stand) is
plugged firmly into the USB slot of your computer. Check to see
that the drivers for the Adapter have been installed. Right-click
on the "My Computer" icon on your desktop. Choose "Properties"
and navigate to the "Device Manager" and see if your Adapter is
listed without any errors. If an error is indicated, contact Belkin
Technical Support.
Link LED is blinking slowly; cannot connect to a wireless
network or the Internet.
If your Adapter appears to be functioning properly, but you
cannot connect to a network or you have a red wireless icon
at the bottom of your screen, the problem may be that there is
a mismatch between the network name (SSID) settings in your
wireless network properties.
Check the SSID settings to see if they match. The SSID is
case-sensitive and the spelling on each computer must be
exactly the same in order for the Adapter to connect to the
wireless router (or access point).
Note: To check the Adapter settings or look for an available
network, double-click the Signal Indicator icon to bring up the
"Wireless Monitors" screen. Click the "AP List" if you do not see
the network you are trying to connect to. Click the "Refresh"
button to scan the "air" for wireless networks.
For more information about setting up an SSID, please refer to
your router manufacturer's user manual.
If issues persist even at close range, please contact Belkin
Technical Support.
34 34