Belkin F5D7050 User Manual page 26

Introduction Using the Belkin Wireless LAN Monitor Utility
3.
Clicking the "Configure" button will allow you to choose your
Network Authentication type.
For home or small business users, select "WPA-PSK" under
"Network Authentication".
Note:
Select WPA if you are using this computer to connect to a
corporate network that supports an authentication server such
as a radius server. Please consult your network administrator for
further information.
4.
Select "TKIP" or "AES" under "Data Encryption". This setting
must be identical to the wireless router that you set up.
5.
Type your encryption key into the "Network key" box.
Important:
Enter your pre-shared key. This can be from eight to
63 characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
6.
Click "OK" to apply settings.
Setting up Windows XP WZC Utility to use WPA
Note:
If you have not done so already, you must download the WPA
update from Microsoft Windows Update to enable WPA support. This
can be found at the Microsoft website by searching for the term "WPA
Wireless". Locate the update called "KB826942", download it, and
update your operating system.
24 24