Network" Screen. The "Advanced" Button Will Allow You To View - Belkin F5D7050 User Manual

Securing your Wi-Fi Network
Connecting your Computer to a Wireless Router (or
Access Point) that Requires a 64-Bit or 128-Bit WEP Key
1.
Double-click the Signal Indicator icon to bring up the "Wireless
Network" screen. The "Advanced" button will allow you to view
and configure more options of your Adapter.
2.
Under the "Wireless Network" tab, select a network name from
the AP list and click "Configure".
3.
Under "Data Encryption" select "WEP".
4.
Ensure that the check box "Network key is provided for me
automatically" at the bottom is unchecked. If you are using this
computer to connect to a corporate network, please consult your
network administrator if this box needs to be checked.
5.
Type your WEP key in the "Network key" and "Confirm key" boxes.
Important:
A WEP key is a combination of numbers and letters
from A-F and 0-9. For 128-bit WEP, you need to enter 26 keys.
For 64-bit WEP, you need to enter 10 keys. This network key
needs to match the key you assign to your wireless router (or
access point).
6.
Click "OK", and then "Apply" to save the settings.
Connecting your Computer to a Wireless Router (or
Access Point) that uses WPA-PSK (no server)
1.
Double-click the Signal Indicator icon to bring up the "Wireless
Network Properties" screen. The "Advanced" button will allow
you to view and configure more options of your Adapter.
2.
Under the "Wireless Networks" tab, select a network name from the AP
list and click "Configure". The screen on the next page will appear:
29 29
1
2
3
4
5
6
7
8
9