Table of Contents
Advertisement
1. Ceiling Fan Light Kits (see store or catalog).
2. Ceiling Fan/Light Controls (see store or catalog).
3. Downrod Extension Kits (see store or catalog).
WARNING
!
The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.
!
WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER
BEFORE TROUBLE SHOOTING YOUR FAN.
TROUBLE
1. Fuse or circuit breaker blown.
1. Fan will not start.
2. Loose power line connections to the fan, or loose
switch wire connections in the switch housing.
3. Reversing switch in neutral position.
1. Blades not attached to fan.
2. Fan sounds noisy.
2. Screws securing fan blade flanges to motor
are loose.
3. Wire connectors inside switch housing rattling.
4. Motor noise caused by solid-state variable
speed control.
5. Screws holding blades to flanges are loose.
1. Setscrewin motor coupling is not tightened
3. Fan wobbles
securely.
excessively.
2. Setscrew in the hanger ball/downrod assembly is
loose.
3. Screws securing fan blade flanges to motor are loose.
4. Fan blade flanges not seated properly.
5. Hanger bracket and/or ceiling outlet box is not
securely fastened
6. Fan blades out of balance.
Accessories
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or acces-
sories not designated for use with this product by
Emerson Electric Co. could result in personal injury
or property damage.
Trouble Shooting
PROBABLE CAUSE
1. Check main and branch circuit fuses or circuit breakers.
2. Check line wire connections to fan and switch switch wire
3. Make sure reversing switch position is all the way to one side.
1. Attach blades to fan before operating.
2. Check to make sure the screws which attach the fan flanges to the
3. Check to make sure wire connectors in switch housing are not
4. Some fan motors are sensitive to signals from Solid-State variable
5. Tighten screws securely.
1. Raise coupling cover and tighten setscrew securely.
2. Tighten the setscrew in the hanger ball/downrod assembly.
3. Check to be sure screws which attach the fan blade flanges to the
4. Check to be sure the fan blade flanges seat firmly and uniformly to
5. Tighten the hanger bracket screws to the outlet box, and/or secure
6. Interchanging an adjacent (side-by-side) blade pair can redistribute
9
WARNING
!
SUGGESTED REMEDY
connections in the switch housing.wire connections in the switch
housing.
WARNING: Make sure main power is turned off.
!
motor are tight.
rattling against each other or against the interior wall of the switch
housing.
WARNING: Make sure main power is turned off.
!
speed controls. If Solid-State Control is used and motor noise
results choose an alternative control method.
motor are tight.
the surface of the motor. If flanges are seated incorrectly, loosen
the flange screws and retighten according to the procedure in the
section on "How to Put Your Ceiling Fan Together".
outlet box.
the weight and result in smoother operation.
U.L. Model No.: CF935
Advertisement
Table of Contents
