Changing The Card - ZLG CANDTU-200UWGR User Manual

CANDTU-200UWGR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
6.1.4

Changing the Card

1) Pause recording. Pause recording by using the configuration software (or disconnect
the power failure detection signal first). The device enters a suspended state, the SD
card saves data, and the device stops.
2) Pull out the SD card, and remove the SD card in the pause state. The device does not
sound an alarm.
3) Insert the SD card, and reinsert the SD card. The device automatically resumes
recording and detects the SD card.
Figure 6.5 Viewing the firmware version
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
53
User Manual