CANDTU-200UWGR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
5.2 Quick Use of the USBCAN Function
Connect the CANDTU-200UWGR to the PC with a USB cable, connect the two CANs
of the CANDTU-200UWGR to each other, and connect the power cable to the
CANDTU-200UWGR. Run the CANtest software installed in the previous section on the
PC (as shown in Figure 5.5).
After starting CANtest, select a device type. We choose "CANDTU". The parameter
setting interface of the device is displayed (as shown in Figure 5.6). The baud rates of
CAN0 and CAN1 must be consistent with the two CAN baud rates of the
CANDTU-200UWGR.
Figure 5.4 Installation complete
Figure 5.5 CANTest software
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
47
User Manual