CANDTU-200UWGR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
4.2.18 Network Server Settings
1)
Start the cantest host computer software, and select the "CANDTU" item, as shown in
错误!未找到引用源。.
Configure the server, as shown in 错误!未找到引用源。.
2)
Set "Device Index Number" and "Channel Number"
Select "Server" as the work mode.
Set the local port to be the same as "Remote Port" under "Network
Configuration" of the CANDTU configuration software
Click "OK and start CAN" to start the web server
3)
Wait until the device is connected. You can also open "Device Information" under
Figure 4.37 Device selection
Figure 4.38 Configuration interface
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
38
User Manual