Sms Configuration; Network Configurations - ZLG CANDTU-200UWGR User Manual

CANDTU-200UWGR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual

GPS. Only use the positioning data provided by the GPS system.
3) Period setting
Set the GPS track data recording period, in seconds.

4.2.12 SMS Configuration

Figure 4.31 shows the SMS configuration item. Six target numbers can be set, and
SMS alarm conditions can be selected.
1) Number settings
Set the target number for SMS notification.
2) Function enable

If selected, enable the SMS alarm function;

If not selected, the SMS alarm function is disabled.
3) Function selection

The record is full. An alarm is generated when the channel space is full;

Bus error, CAN bus error. An alarm is generated;

If the storage status is abnormal or the SD card is abnormal, an alarm is
generated;

GPS area. When the device location meets the preset GPS area, an alarm is
generated;

4.2.13 Network Configurations

Figure 4.32 shows the network configuration items. You can set three remote
addresses or domain names.
Figure 4.31 SMS configuration
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
34
User Manual