Yamaha RX-V6ABL User Manual page 62

PREPARATIONS > How to place speakers (speaker systems)
NOTICE
Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter. If you are not making
(
bi-amp connections, make sure that the brackets or cables are connected before connecting the speaker cables. Refer to the
instruction manual of the speakers for details.
NOTE
The following speakers cannot be connected simultaneously.
(
Surround back speakers
(
Bi-amp speakers
(
At most 5.1-channel system can be used by bi-amp connections.
(
You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the
(
same sounds.
When using only one subwoofer, you can place it either in the left or right side.
(
Related links
"Setting your speaker system" (p.187)
(
"Speaker requirements" (p.63)
(
62