Table of Contents
Advertisement
en Troubleshooting
Fault
Display for water supply
lights up
Display "Check water sup-
ply" flashes
Displays flash
Washing results
Fault
Tableware is not dry.
42
Cause
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
A technical fault is present.
Appliance door is not closed
properly.
Cause
No rinse aid used or dosage
set too low.
Troubleshooting
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the "Wastewa-
▶
ter pump " → Page 52 so it clicks
into position.
Press .
1.
Unplug the appliance or switch off
2.
the fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the appli-
4.
ance in a socket or switch on the
fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact "Customer Service"
‒
→ Page 53 and give the er-
ror code.
Close the appliance door.
▶
Arrange the tableware so
‒
that no parts project beyond
the basket and prevent the
appliance door from closing
properly.
Troubleshooting
Add "Rinse aid" → Page 25.
1.
Set the amount of rinse aid to be
2.
dispensed.
→ "Setting the amount of rinse aid",
Page 26
Advertisement
Table of Contents
