Removing Tableware; Basic Operation; Opening Appliance Door; Switching On The Appliance - Siemens SN61HX02AG User Manual

Table of Contents

Advertisement

Removing tableware

WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
To prevent water dripping on the
1.
tableware, unload it starting at the
bottom and working up.
Check the washing tank and ac-
2.
cessories for soiling and clean if
necessary.
→ "Cleaning and servicing",
Page 37

Basic operation

Basic operation
Basic operation

Opening appliance door

Open the appliance door.

Switching on the appliance

Press
⁠ .
The Eco 50° programme is set by
default.
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
1
Depending on the appliance specifications
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.

Setting a programme

To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
Press the programme button re-
peatedly until the right programme
has been selected.
→ "Programmes", Page 17
a The programme is set and the LED
flashes.

Setting additional functions

You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
→ "Programmes", Page 17
Press the button for the relevant
additional function.
→ "Additional functions", Page 18
a The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by 3, 6 or 9 hours.
Press
repeatedly until the relev-
1.
ant display lights up.
To activate timer programming,
2.
press
⁠ .
Note: To deactivate timer program-
ming, press
repeatedly until none
of the displays 3h, 6h or 9h light up.
Basic operation en
1
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sn61hx02ag/13

Table of Contents