Table of Contents
Advertisement
10. Repeat the above steps to configure other regions. Up to 4 regions can be set. You
can click the Clear button to clear all pre-defined regions.
11. Click Arming Schedule to set the arming schedule.
12. Click Linkage Method to select the linkage methods for intrusion detection,
including Notify Surveillance Center, Send Email, Upload to FTP/Memory
Card/NAS, Trigger Channel and Trigger Alarm Output.
13. Click Save to save the settings.
Configuring Line Crossing Detection
Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a
pre-defined virtual line, and some certain actions can be taken when the alarm is
triggered.
Line crossing detection function varies according to different camera models.
Note:
Steps:
1. Enter the Line Crossing Detection settings interface, Configuration > Event >
Smart Event > Line Crossing Detection.
Network Camera User Manual
127
Advertisement
Table of Contents
