Advertisement
5. Celsius or Fahrenheit: these lights indicate if the temperature is
being shown in Celsius or Fahrenheit.
6. Temperature display for the upper zone: the LED display will flash when
setting the temperature. When not setting the temperature (normal
mode), this display will show the current temperature for the upper zone.
7.
UP: use this button to raise the temperature in 1 degree increments.
8.
DOWN: use this button to lower the temperature in 1 degree
increments.
9.
Power: use this button to turn the wine cooler ON or OFF. To power OFF the
cooler, press
for a minimum of 5 seconds. Press the same button to power
ON .The LED display will show the original temperature set prior to
resetting the appliance.
The Symbol refers to the lower zone
10.
The Symbol refers to the upper zone
11.
TEMPERATURE ZONES
The wine cooler has two temperature zones. The recommended temperature setting for
each zone is:
% Upper zone (40°- 56°F)
% Lower zone (54°- 65°F)
SETTING A TEMPERATURE
Choose between Celsius and Fahrenheitby pushing the
•
now display in Celsius or Fahrenheit.
If setting the temperature, press the
•
or DOWN
pushing either buttons for the first time, the readout will show the original temperature set.
Pressing the UP
•
Pressing the DOWN
•
NOTE: When using the unit for the first time or after a long period of inactivity, there may be a
variance of a few degrees between the selected temperature and the temperature indicated
on the LED readout. This is normal due to the length of inactivity, and will correct itself after
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
button first. You can then select the UP
buttons to change the temperature in one degree increments. When
button will increase the temperature by 1 degree.
button will decrease the temperature by 1 degree.
i n f o @ v i n o t e m p . c o m
button.The temperature will
11
Advertisement
