Protection Of The Environment - PROFIX TRYTON TOE1601 Operating Instruction

bag after each use, shake it off and then clean thoroughly. If the bag is
very dirty it should be hand-washed in warm water with soap and then
rinsed with fresh water. Let the bag dry completely before reinstallation.
The machine should be stored in a safe place inaccessible for children.
Keep the device clean, protect against penetration of moisture and dust.
The storage condition should eliminate possibility of mechanical failures
and influence of adverse weather factors.
TRANSPORTATION:
The device should be conveyed and stored in packages that protect the
content against moisture, penetration of dust and small debris. In
particular, protect carefully the ventilation slots. Small pieces of earth or
debris that penetrate into the device housing may damage the motor.

PROTECTION OF THE ENVIRONMENT:

NOTE: The symbol nearby denotes that old equipment must
never be thrown away together with other waste (with the
penalty of a fine). Hazardous components of electronic
equipment may adversely affect the natural environment
and human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
machinery and appliances. Moreover, general purpose collecting points
for such equipment are available.
EXPLANATION OF SAFETY DECALS PLACED ON THE DEVICE:
Watch the ejected objects!
Keep safe distance to third persons.
Prior to commencement of any maintenance or
repair jobs disconnect the device from the source
of power voltage.
In case of the power cord damage disconnect it
immediately form the electric grid.
Keep dry. Do not use the blower under rainy
weather and protect against moisture.
While operating the blower always wear
protecting glasses or goggles.
Always wear hearing protectors.
Warning! Rotating parts!
Keep hands and feet within sufficient distance
from openings.
Manufactured for:
PROFIX Ltd., 34 Marywilska Street, 03-228 Warsaw, POLAND.
8
Do not allow third persons to
enter the hazardous area!