Back-Up Lamps - Chevrolet 2011 Malibu Owner's Manual

5. Disconnect the wiring harness
connector (C) from the LED (B).
6. Turn the LED (B)
counterclockwise to remove it.
7. Install a new LED (B).
8. Reverse Steps 2 through 6 to
reinstall the taillamp
assembly (A).

Back-Up Lamps

1. Open the trunk. See
for more information.
Vehicle Care
2. Remove the push pins holding
the trunk trim (B).
3. Move the trim aside far enough
to gain access to the bulb
assembly (A).
10-33