Loading Door Lock - Smeg WHT1114LSIN-1 User Manual

4.3.11 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the loading door in
cases when the water level is unsuitable.
"Door Locked" symbol appears on the display when the loading door is locked.
Opening the loading door in case of power failure:
C
In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the loading
door manually.
A
WARNING:
machine.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
22 / EN
To avoid any water overflow before opening the loading door, make sure there is no water left inside the
88
0 C
88:88
1888
• Open the pump filter cap.
• Release the loading door emergency handle located at
the rear side of the filter cap.
• Pull down the loading door emergency handle once and
open the loading door. After opening the loading door, re-
insert the loading door emergency handle.
• If the loading door does not open, try again by pulling
down the handle.
:
Washing Machine / User's Manual