Installation - Gear Head OM5000WR User Manual

Installation:

NOTE: The pictures shown in the User's Manual are for demonstration purposes only. Your computer or product may look
slightly different.
1. Remove the Battery Compartment Cover on the back of your Mouse.
2. Install two of the enclosed Ni-MH rechargeable AAA batteries into your Mouse following the battery orientation
guide printed in the battery bay of your mouse, and then replace the cover back onto your Mouse.
3. Turn on your computer and wait for it to load.
4. Plug the Wireless USB Receiver into an available USB port on your computer. Your mouse will establish a
connection with the receiver and is ready to be used. If a connection is not established, there might be a high
level of surrounding interference, press the Connect button on the back of the Wireless USB Receiver, and then
press the Connect button on the back of your Mouse.
5. Your computer will detect your Mouse and the necessary drivers will be installed automatically.
6. Your Mouse is now ready to be used.
4