Advertisement
INSTALLATION:
For All Operating Systems
1. Make sure you have successfully installed the AAA Batteries into your Mouse, refer to the
Installing Batteries section in this manual if necessary.
2. Turn on your computer, plug the enclosed USB Receiver into an available USB port on your
computer. The LED indicator of the USB Receiver will flash slowly. (TIP: If you are not able
to find an available USB port on your computer, please refer to the user's manual of your
computer for more help.)
3.
Your wireless optical mouse is now ready to be used.
CHANGE DPI FOR YOUR MOUSE
Press the DPI button on the top of your mouse to change the DPI of your mouse between 500dpi
and 1000dpi.
DPI
Button
5
Advertisement
