Using The Battery Charger - Gear Head OM5000WR User Manual

Using the Battery Charger:

1. Remove the Battery Compartment Cover on the back of the Wireless USB Receiver.
2. Install two Ni-MH rechargeable AAA batteries into the Wireless USB Receiver following the battery orientation guide
in the battery bay.
3. Replace the cover back onto the Wireless USB Receiver.
4. Turn on your computer and connect the Wireless USB Receiver into an available USB port on your computer, the
Wireless USB Receiver will begin charging the installed Ni-MH rechargeable batteries.
5. There are two LED indicators on the Wireless USB Receiver:
LED
Connection LED Solid Red
Battery
Charging LED
Off No Battery Installed/Battery Is Fully
Status Description
Charged
Inactive/Mouse Not Detected
Flashing Mouse Detected and It Is Active
Red
Blinking Scanning Mouse Connection
Red
Solid Red Charging Battery
5