Table of Contents
Advertisement
For RF signal transmission.
② Display
View menu screens and settings. Press any control button to activate the backlight.
③ Control Buttons
Use to navigate through parameter menus and to change settings.
④ Battery Compartment
Requires Shure SB910 rechargeable battery.
⑤ Battery Door
Latching door to secure battery.
⑥ SMA Connector
Connection point for RF antenna.
⑦ Infrared (IR) Port
Align with the receiver IR port during an IR Sync for automated transmitter tuning and setup.
⑧ Power Switch
Powers the unit on or off.
⑨ Power LED
◦
Green = unit is powered on
◦
Red = low battery, Mute Mode enabled, input overload, or battery error (see Troubleshooting)
⑩ Input Jack
Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable.
Note: A LEMO connector model variation of this transmitter is available.
⑪ Battery Charging Contacts
Charging contacts for use with docking battery chargers.
Shure Incorporated
5/25
Advertisement
Table of Contents
