Honda CBR500R 2020 Manual page 123

Make sure that the slot on the brake
2.
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Swingarm
3.
4.
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
Slot
5.
Torque: 20 lbf·ft (27 N·m, 2.8 kgf·m)
6.
Lug
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tire Puncture
Adjust the drive chain slack.
Install and tighten the rear axle nut.
Hold the adjusting bolts and tighten the
lock nuts.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
Removing Wheels
u
P. 96
2
121