Table of Contents
Advertisement
11. Using the Wi-Fi function
Displaying pictures on a TV
You can display pictures on a TV that supports the
Digital Media Renderer (DMR) function of the DLNA
standard.
Preparations
Set the TV to DLNA waiting mode.
•
Read the operating instructions for your TV.
1
Select the menu.
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Playback on TV]
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
•
When the connection is established, the screen is displayed.
4
Take or play back pictures on this unit.
•
To change the setting or disconnect, press [Wi-Fi].
(You can also terminate the connection by performing the following operations:
>
MENU
•
When a TV is connected to this unit, the TV screen may temporarily return to the status before
the connection. Pictures are displayed again when you take or play back pictures.
•
[Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
•
Motion pictures cannot be played back.
•
During the multi/calendar playback, pictures displayed on the screen of this unit are not
displayed on TV.
(P53)
>
>
[Setup]
[Wi-Fi]
(P289)
(P252)
>
[Wi-Fi Function]
[Yes])
269
Advertisement
Table of Contents
