Chevrolet 2010 Impala Owner's Manual page 224

1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say Change phone . The system responds with
Please wait while I search for other phones .
If another phone is found, the response will be
<Phone name> is now connected .
If another phone is not found, the original
phone remains connected.
The system can store up to thirty phone numbers as
name tags that are shared between the Bluetooth and
OnStar systems.
The system uses the following commands to store and
retrieve phone numbers:
Store
Digit Store
Directory
4-78
for two seconds. The system
The store command allows a phone number to be
stored without entering the digits individually.
1. Press and hold
responds with Ready followed by a tone.
2. Say Store . The system responds with
Store, number please followed by a tone.
3. Say the complete phone number to be stored at
once with no pauses.
If the system recognizes the number it
responds with OK, Storing and repeats the
phone number.
If the system is unsure it recognizes the phone
number, it responds with Store and repeats
the number followed by Please say yes or no .
If the number is correct, say Yes . If the
number is not correct, say No . The system
will ask for the number to be re entered.
for two seconds. The system