How well the cruise control will work on hills depends
upon the vehicle speed, load and the steepness of the
hills. When going up steep hills, you might have to step
on the accelerator pedal to maintain your speed. When
going downhill, you might have to brake or shift to a
lower gear to keep your speed down. If the brakes are
applied the cruise control will turn off.
There are three ways to end cruise control:
To disengage cruise control, step lightly on the
brake pedal, or
Press the
button on the steering wheel.
To turn off the cruise control, press the
on the steering wheel.
The cruise control set speed memory is erased from
memory by pressing
or if the ignition is turned off.
It controls the following systems:
Headlamps
Taillamps
Parking Lamps
button
License Plate Lamps
Instrument Panel Lights
Fog Lamps (If Equipped)
The exterior lamps
control is located on the
instrument panel to the
left of the steering wheel.
4-9