Guarantee And Support; Troubleshooting - Philips PerfectCare Elite GC9644 User Manual

ENGLISH
20
Problem
The ironing board cover
becomes wet or there
are water droplets on
the garment during
ironing.
6 Fold the mains cord into half. Then fold it into half two
more times. Push the folded-up mains cord into the
cord storage compartment with the mains plug facing
outwards.
7 Carry the appliance by the handle of the iron.

Guarantee and support

If you need information or support, please visit
www.philips.com/support or read the separate worldwide
guarantee leaflet.

Troubleshooting

This chapter summarises the most common problems you
could encounter with the appliance. If you are unable
to solve the problem with the information below, visit
www.philips.com/support for a list of frequently asked
questions or contact the Consumer Care Centre in your country.
Possible cause
Steam has condensed on the
ironing board cover after a
long ironing session.
Solution
Replace the ironing board cover
if the foam material has worn
out. You can also add an extra
layer of felt material under the
ironing board cover to prevent
condensation on the ironing
board. You can buy felt in a fabric
shop. Alternatively you can you
can use the Philips Easy8 ironing
board with PerfectFlow ironing
board cover.