Philips PerfectCare Elite GC9644 User Manual page 11

3 You can start ironing when the 'iron ready' light stops
flashing and lights up continuously.
Note: The default steam setting is the normal steam mode. It is
recommended to use this mode for all ironable fabrics.
Steam trigger
- Press the steam trigger to start ironing.
Tip: If you have thick garments keep the steam trigger pressed
continuously when you move the iron over the fabric. Then
move the iron over the same area a few more times without
steam to dry the fabric. The steam will stop when you release
the steam trigger.
Note: For the best results on silk and shiny synthetic fabrics it is
recommended to keep the steam trigger pressed continuously
while ironing.
Steam boost function
The steam boost function is designed to help tackle difficult
creases.
- Double press the steam trigger for a continuous shot of
steam. It is not necessary to press and hold the steam trigger
continuously when the steam boost function is activated. To
2x
stop the steam boost function, press the steam trigger once.
Vertical ironing
For vertical steaming, we advise you to switch to the TURBO steam
mode.
- Put the garment that you want to steam on a clothes hanger
and hang it from e.g. a hanging rack. Hold the iron in vertical
position. Pull the garment with one hand and stretch it slightly
for more effective wrinkle removal. While pulling the garment,
press the steam trigger and move the iron up and down.
ENGLISH
13