Recording - Yamaha HTR5540OM Owner's Manual

Recording adjustments and other operations are
performed from the recording components. Refer to the
operation instructions for these components.
1
NATURAL SOUND AV RECEIVER
STANDBY
/ON
SILENT
STEREO PROGRAM MEMORY TUNING MODE
EFFECT MAN'L/AUTO FM AUTO/MAN'L MONO
PHONES
SLEEP
DVD
2
CD
– PRESET
1
Turn on the power of this unit and all
connected component.
2
Select the source component you want to
record from.
INPUT
or
Front panel
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.

RECORDING

2
INPUT VOLUME
INPUT M0DE 6CH INPUT
BASS TREBLE
FM/AM PRESET/TUNING PRESET/TUNING A/B/C/D/E
EDIT
– + – +
P O W E R
6CH INPUT
D-TV/CBL VCR
V-AUX
TUNER MD/CD-R
+ A/B/C/D/E
DVD D-TV/CBL VCR
V-AUX
CD TUNER MD/CD-R
Remote control
Notes
• Do a test recording before you start an actual recording.
• When this unit is set in the standby mode, you cannot record
between the components connected to this unit.
• The setting of BASS, TREBLE, VOLUME, "5 L/R
BALANCE" on the SET MENU and DSP programs does not
effect the recorded material.
• A source connected to the 6CH INPUT jacks on this unit
cannot be recorded.
• A given input source is not output to the same OUT (REC)
channel. (For example, the signal input from VCR IN is not
output to VCR OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material
may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
I Special considerations when
recording DTS software
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For LDs, DVDs and CDs encoded with DTS, when your
player is compatible with the DTS format, follow its
operation instruction to make a setting so that the analog
signal will be output from the player.
I Timer playback/recording
This unit can perform playback or recording with an
external timer (not supplied). Refer to the operating
instructions for the component and the timer to be used.
Notes
• Stored data, such as input source, will be reflected when
playback or recording with the timer.
• If you do not want any sound output when recording with a
timer, turn the volume down.
Memory back-up
The memory back-up circuit prevents the stored data
(input source, volume level, set menu settings and so
on) from being lost even if this unit is disconnected
from the AC outlet. However, if the timer is turned off
for more than one week, the stored data will be lost.
39