Table of Contents
Advertisement
SET MENU
7 I/O ASSIGN (input/output
assignment)
It is possible to assign jacks according to the component
to be used if this unit's DIGITAL INPUT jack settings
(component names for jacks) differ from that component.
This makes it possible to change the jack assignment and
effectively connect more components.
Once you assign, you can select that component with
INPUT l / h (or the input selector buttons on the
remote control).
I 7C OPTICAL IN for OPTICAL
INPUT jacks
Choices:
(1) MD/CD-R, CD, V-AUX, VCR,
D-TV/CBL, DVD
I 7D COAXIAL IN for COAXIAL
INPUT jack
Choices:
(2) MD/CD-R, CD, V-AUX, VCR,
D-TV/CBL, DVD
Notes
• You cannot select an item more than once for the same type of
jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
8 INPUT MODE (initial input
mode)
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn
on this unit (see page 25 for details about the input
mode).
Choices: AUTO, LAST
AUTO
Select this to allow this unit to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last
input mode used for the respective source.
44
9 DISPLAY SET
I DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
10 MEM. GUARD (memory guard)
Use this feature to prevent accidental changes to settings
on this unit.
Choices: ON, OFF
Select ON to protect the following features:
• All SET MENU items
• Center, rear speakers, and subwoofer levels
• DSP program parameters
Notes
• When this item is set to ON, you cannot use the test tone.
• When this item is set to ON, you cannot select any other SET
MENU items.
Advertisement
Table of Contents
