In Agriculture or Automotive you will have Four files:
1. HP Limiting with Variable Command /Anti-stall with Variable Command.
Monitors RPM, the command in, and adjust the output accordingly.
2. HP Limiting with fixed command/Anti-stall with fixed command.
Monitors RPM and adjusts the output accordingly.
3. Single Coil Pump Control / Valve Control
Controls the single-coil pump/valve.
4. Dual Coil Pump Control / Valve Control
Controls the dual-coil pump(s)/valve(s).
023-00354-Rev1.4
Example data files are saved to your PC during the installation.
When loading factory default data files, select "Environment", then select
the desired default file.
Default Data files will overwrite any settings in the unit.
Adjust the Coil Settings first, then other settings as needed.
evc/epc User Manual
evc/epc Controller
With SAE J1939 Interface
Copyright © High Country Tek, Inc. – 2013
14