Page 1
John Lewis ELLIS EXTENSION DINING TABLE 1 60-200CM Stock Number: 87702708 Thank you for purchasing this Ellis Extension Dining Table 1 60-200cm. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product.
Page 2
Fittings and parts checklist Legs Table top Cross dowel Flat washer M8 Ø 1 2 x 60 Threaded bolt Lock washer Spanner Ø8 x 70 Page : 2 IW-17-4335-012-0...
Page 3
Step By Step Assembly Instructions Step : Insert cross dowels (A) into the legs ( 1) by placing each fitting (A) into the hole on top of each leg as shown. Ensure the horizontal marking on each fitting (A) is facing out as shown. : Insert 2x threaded bolts (B) into the two holes on the bevel of each leg then tighten them into the holes of fitting (A) that is concealed in each leg ( 1) as shown.
Page 4
Step 3 : Caution: this product is heavy, with the help of an assistant stand the table upright. : Pull table top apart as shown, until butterfly leaf is clearly visible underneath. Step 4 : Rotate the extension leaf out as shown. Page : 4 IW-17-4335-012-0...
Page 5
Step 5 : Extend the leaf by turning the top layer of the leaf all the way open as shown. Step 6 : -Close the top table by sliding both sides of the main table top toward the leaf as shown. Ensure the metal pins are aligned to the holes on the main table top and the leaf before closing the table.
Extendable dining tables should be left extended for the first few months to avoid an uneven appearance. Likewise, lamps and ornaments should also be moved regularly. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street, London, SWIE 5NN www.johnlewis.com Page : 6...