Spindle.height - Grizzly G1007 Owner's Manual

spindle height
you have two options for spindle height adjust-
ment—a drill press style, levered downfeed and
a micro adjustment handwheel. to operate the
downfeed lever, simply pull forward and down on
the lever nearest you. the spindle will go down
until you stop pulling or until it hits the depth
stop.
to operate the micro-adjustment handwheel:
tighten the locking knob located on the
1.
center of the hub for the down-feed levers
(figure 25).
Micro-adjustment
handwheel
figure 25. Micro-adjustment handwheel.
g1006/7 heavy duty Mill/drill
locking Knob
note: Locking out the levered downfeed
will transfer control to the handwheel. The
handwheel will not function if the locking knob
is loose.
loosen the setscrew on the rim surface of
2.
the handwheel dial. turn the dial until the "0"
lines up with the index line. tighten the set-
screw.
turn the handwheel according to the distance
3
you want to move downward. each complete
revolution equals 0.100".
to lock the spindle:
tighten the spindle locking lever to lock the
1.
spindle for milling operations.
-25-