Panasonic KX-PRW110BX Operating Instructions Manual page 48

Useful Information
SMS (Short Message Service)
Problem
The SMS message
centre number is logged
in the caller list and the
message is not received.
I cannot send or receive
SMS messages.
"FD" is displayed.
"FE" is displayed.
"E0" is displayed.
Liquid damage
Problem
Liquid or other form of
moisture has entered the
handset/base unit.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
48
PRW110BX_UE_(en-en)_1120_ver043.pdf 48
Cause/solution
R Someone tried to send you a message while SMS is turned off.
Turn it on (page 36).
R You have not subscribed to the appropriate service. Contact
your service provider/telephone company.
R The SMS message centre number(s) are not stored or are
incorrect. Store the correct numbers (page 36).
R Message transmission was interrupted. Wait until the message
has been sent before using other telephone functions.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R The unit could not connect to the SMS message centre.
Confirm that the correct SMS message centre numbers are
stored. Confirm that SMS is turned on (page 36).
R An error occurred while sending the message. Try again.
R Your phone number is permanently withheld or you have not
subscribed to the appropriate service. Contact your service
provider/telephone company.
Cause/solution
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
11/20/2013 1:50:58 PM