Table of Contents
Advertisement
Disconnecting from the network
D i s c o n n e c t i n g f r o m t h e n e t w o r k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
Touch the
symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
lights up on the cooking position display.
„
Set the
value on the control panel.
‹
3.
The appliance is disconnected from the home network
and the
symbol on the control panel goes out.
D
Connecting to the network
C o n n e c t i n g t o t h e n e t w o r k
Touch the
symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
‹
lights up on the cooking position display.
On the control panel
3.
set the "Connect automatically"
or the "Connect manually"
Follow the instructions in the section entitled
4.
"Automatic registration in the home network" or
"Manual registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
Touch the
symbol for 4 seconds.
0
1.
Product information will be displayed.
•'‚
•'‚
value or
‚
value.
ƒ
Touch the
symbol repeatedly until the
0
2.
setting appears.
‹
lights up on the cooking position display.
Set the
value on the control panel.
‚
3.
Follow the instructions in the app to complete the
4.
connection process.
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
cooking positions to the hob.
Notes
To change basic settings the hob must be switched
■
off.
Operation on the appliance always has priority.
■
During this time it is not possible to operate the
appliance using the Home Connect app.
The transfer of settings is activated when the
■
appliance is supplied.
If the transfer of settings has been deactivated, only
■
the hob's operating statuses will be displayed in the
Home Connect app.
Touch the
0
symbol for 4 seconds.
1.
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
To activate the transfer, select the
3.
control panel. To deactivate the transfer, select the
value.
Confirming settings
As soon as cooking settings are transmitted to a
hotplate, the hotplate indicator will start to flash. To
confirm that you want to use these settings, touch the
indicator for the required hotplate. To reject these
settings, touch any other button on the hob.
Home Connect
en
•'ƒ
•'...
value on the
‚
‹
27
Advertisement
Table of Contents
