Table of Contents
Advertisement
Automatic registration in the home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Manual registration in the
home network".
Touch the
symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
lights up on the cooking position display.
‹
Set the
value on the control panel.
‚
3.
and the
symbol will flash on the cooking
‚
D
position display.
Press the WPS button on the router within the next
4.
2 minutes.
The hob is connected to the home network if the
symbol no longer flashes but is lit up on the
D
cooking position display.
If a connection cannot be established, the
Note:
"Connect manually"
appliance in the home network manually or try
connecting automatically again.
The appliance automatically tries to connect to the
app and the
setting appears.The
•'ƒ
flashes on the control panel.
Start the app on the mobile device and follow the
5.
instructions for automatic network registration.
The registration procedure has been completed once
the
‹
value appears on the cooking position display.
•'‚
value appears.Register the
ƒ
value
‚
Manual registration in the home network
Touch the
symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
lights up on the cooking position display.
‹
Set the
value on the control panel.
ƒ
3.
and the
symbol will flash on the cooking
ƒ
D
position display.
Use the "Home Connect" SSID and the "Home
4.
Connect" key to register the mobile device on the
hob network.
Home Connect
en
•'‚
25
Advertisement
Table of Contents
