Tablet Detergents - Beko DIN48431 User Manual

PreparatIon
2. Use longer programs like Eco or Intensive.
3. Check quality and storing conditions of
your detergent
4. Check water hardness on your region and
make the necessary changes needed.
5. Clean your detergent cartridge
periodically (every 3 month) to remove
solid or viscous residues inside. These
residues may cause insufficient dosage.
6. Increase the detergent dosage amount
from the settings to improve the cleaning
performance. ''

Tablet detergents

Table detergents exhibit water softening and
/ or rinse aid effect in addition to detergent
effect. Some types of these detergents also
contain special-purpose washing chemicals
such as glass and stainless steel protectors.
C
Tablet detergents give
satisfying results only under
certain usage conditions. The
best washing performance in
dishwashers is obtained by
using detergent, rinse aid and
water softening salt individually.
A
C
Place the tablet detergent into
the Tablet Detergent Box found
on the upper basket of the
dishwasher (A).
Dishwasher / User's Manual
C
When using tablet detergents,
you can use the Tablet
Detergent Function to improve
the drying performance of the
dishwasher (based on model).
Tablet detergent types commonly found on
the market:
2in1: Contains detergent, rinse aid or water
softening salt
3in1: Contains detergent, rinse aid and
water softening salt
4in1: Contains glass protectors in addition
to detergent, rinse aid and water softening
salt
5in1: Contains glass and stainless steel
protectors in addition to detergent, rinse
aid and water softening salt
C
When using tablet detergents,
follow the manufacturer's
instructions on the packaging.
C
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly on
your glasses after the washing
programme is over when using
a tablet detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
19 / 47 EN