Beko DIN48430 User Manual
Hide thumbs Also See for DIN48430:
Table of Contents

Advertisement

Quick Links

Dishwasher
User's Manual
DIN48430
EN
Document Number :
18 7376 0100_AB_BEKO_E9_EN/ 31-07-19.(10:39)

Advertisement

Table of Contents
loading

Summary of Contents for Beko DIN48430

  • Page 1 Dishwasher User’s Manual DIN48430 Document Number : 18 7376 0100_AB_BEKO_E9_EN/ 31-07-19.(10:39)
  • Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 3 Dishwasher User’s Manual DIN48430 Document Number : 18 7376 0100_AB_BEKO_E9_EN/ 31-07-19.(10:39)
  • Page 4 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 5: Table Of Contents

    CONTENTS 1 INSTRUCTIONS FOR SAFETY Lower basket bottle wire ....26 Upper basket height adjustable rack 26 AND ENVIRONMENT Upper basket multipurpose service General safety ........4 rack ............26 Intended use ..........4 Adjusting the height of the upper Children’s safety ........5 basket ...........27 Disposing of packaging material ..5 Collapsible upper basket wires ..
  • Page 6: Instructions For Safety And Environment

    instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
  • Page 7: Children's Safety

    instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
  • Page 8: Compliance With Weee Directive And Disposing Of The Waste Product

    instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
  • Page 9: Dishwasher Overview

    Dishwasher Overview Upper basket Cutlery basket Lower basket Automatic Liquid/Gel Detergent and Rinse Aid Dosing System Type Label Control panel Door Lower impeller Salt reservoir lid 10. Filters 11. Upper impeller 12. Upper basket rail 13. Upper cutlery basket ( depends on model ) 14.
  • Page 10: Fan Drying System

    Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
  • Page 11: Installation

    Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
  • Page 12: Connection To The Drain

    Installation Permitted water temperature: up must be min. 50 cm and max. 100 cm from to 25°C the floor. A discharge hose longer than 4 The dishwasher may not be connected to meters causes dirty washing. open warm water devices or flow-through Attach the water discharge hose to the water heaters.
  • Page 13: Aquasafe

    Installation Aquasafe+ The voltage and allowed fuse or breaker • protection are specified in the “Technical (depends on model) specifications” section. If the current The Aquasafe+ system protects against value of the fuse or breaker in the house water leaks that may occur at the hose is less than 16 Amps, have a qualified inlet.Water contact with the valve box of electrician install a 16 Amp fuse.
  • Page 14: Preparation Tips For Energy Saving

    PreparatIon Tips for energy saving Following information will help you use the product in an ecological and energy- efficient manner. Wipe away any coarse food remnants on the dishes before putting them in the product. Operate the product after filling it completely.
  • Page 15: Adjusting The Water Softening System

    PreparatIon Adjusting the water softening system Cleaning, rinsing and drying performance of your dishwasher will increase when water softening system is adjusted properly. Adjust the new water hardness level according to the Water hardness level instruction in this booklet. Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water.
  • Page 16: Adding Salt

    PreparatIon 4. Add salt to the salt compartment. To If your machine is equipped speed up dissolution rate of salt in with “Automatic Water water, stir it with a spoon. Hardness Detection System”, water hardness adjustment You can put about 2 kg of will be made by the service/ softening salt into the salt user as standard during first...
  • Page 17: Adding Liquid/Gel Detergent And Rinse Aid

    PreparatIon In addition to liquid/gel Thanks to this system, the amount of rinse detergents that function only aid and liquid/gel detergent required for the as a detergent, there are also selected washing programme is adjusted liquid/gel detergents that act as automatically.
  • Page 18 PreparatIon Using the Automatic Liquid/Gel After fully opening the door of the Detergent Dosing System dishwasher, open the decorative cover as In order to use the Automatic Liquid/ shown with arrows 1 and Gel Detergent Dosing function, select Automatic Liquid/Gel Detergent Dosing function on the control panel.
  • Page 19 PreparatIon Liquid/gel detergents must be used in a Fill the rinse air box only with short time once they have been unpacked. rinse aid, and the detergent box Unpacked liquid/gel detergents may lose only with liquid/gel detergent. their fluidity in time. If you fill it inappropriately, When the detergent warning immediately remove the boxes,...
  • Page 20: Powder Detergents

    PreparatIon Powder Detergents Poor quality detergent Hard water area without the use of Rinse You can find the correct amount of powder detergent for the Old or scratched crockery. (If you have selected programme in the any kind of surface damage to cups, you table "Programme Data and are far more likely to see stains.) Consumption Values".
  • Page 21 PreparatIon When you switch to powder detergent from tablet detergent: Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3. After the empty washing cycle, review the user manual and readjust the water hardness level so as to suit the water Place the tablet detergent into...
  • Page 22 PreparatIon Wipe away any coarse food remnants • (bones, seeds, etc.) on the dishes before placing them in the dishwasher. Place thin, narrow pieces in the middle • sections of baskets if possible. Place the heavily soiled and bigger • items in the lower basket and smaller, delicate and light items in the upper basket.
  • Page 23 PreparatIon Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 21 / 47 EN...
  • Page 24: Cutlery Basket

    PreparatIon Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
  • Page 25: Collapsible Lower Basket Tines

    PreparatIon Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it There are foldable tines (A) located at the will be appropriate to bring the tines in the middle to horizontal lower basket of the machine are designed or vertical position by holding...
  • Page 26: Tray Wash Supports

    PreparatIon SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend.
  • Page 27: Lower Basket Multipurpose / Height Adjustable Service Rack

    PreparatIon Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2.
  • Page 28: Lower Basket Bottle Wire

    PreparatIon Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread...
  • Page 29: Adjusting The Height Of The Upper Basket

    PreparatIon Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
  • Page 30: Collapsible Upper Basket Wires

    PreparatIon Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you In this model, the height setting of the need a larger space for your dishes in the upper basket may be changed using the upper basket of your machine.
  • Page 31: Ceiling Cutlery Basket

    PreparatIon Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
  • Page 32: Operating The Product

    Operating the product 7. Function Selection Keys On / Off Key TrayWash Function 2. Menu Key Fast+ Function 3. Time Delay Selection SteamGloss Function / Menu Direction Selection Keys Half Load function 4. Selection / Confirmation Key 5. Display 8. Programme Selection Keys 6.
  • Page 33: Programme Selection / Programme Cancel Key

    Operating the product On/Off Key Programme selection When you press the On/Off key, the Press the On/Off button to turn on indicator lights illuminate on the display your machine. for ON position. The lights turn off in OFF 2. Check the Salt and Rinse Aid indicators position.
  • Page 34 Operating the product /47 EN Dishwasher / User’s Manual...
  • Page 35: Auxiliary Functions

    Operating the product Auxiliary functions TrayWash Function Select Intensive 70°C programme and press Washing programmes of your dishwasher function key to run this function. are designed to obtain the best cleaning effect, considering the type of the soiling, SteamGloss Function soiling degree and properties of the dishes It provides superior drying performance.
  • Page 36 Operating the product Functions Under the Settings EverClean Function Off/On Menu (depends on the model) Under the settings menu of your product, there are some additional functions that depend on the model. To access these functions, press and hold the Menu key for 3 seconds. Use <- and +>...
  • Page 37 Operating the product Liquid Dosing Function detergent use Changing Warning Sound Volume setting: After switching on your machine, press Level 1: 10 cc lower than the default value the Menu key for 1 second. Level 2: 5 cc lower than the default value 2.
  • Page 38: Scheduling The Washing Time

    Operating the product Tablet detergent function 4. Close the door of your machine after Allows to obtain a better drying setting the Delayed Start. Once the delay time is over, the selected performance from the multi-purpose programme will start automatically. detergents called as all in one detergents such as 2in1, 3in1, 4in1, 5in1 and etc., Changing the settings while Time...
  • Page 39: Cancelling The Programme

    Operating the product Salt indicator ( ) Your machine performs water softening depending on the Please check the salt indicator on the hardness level of the supply display to see whether there is adequate water. Washing time can amount of softening salt in the dishwasher change while the programme or not.
  • Page 40: End Of Programme

    Operating the product End of programme Overflowing warning If the machine intakes too much water or When the programme you have there is leakage at any of the components selected comes to an end, an then the machine will detect this and E:01 audible warning signal will warn icon will flash on the Programme indicator.
  • Page 41: Maintenance And Cleaning

    Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
  • Page 42: Cleaning The Hose Filter

    Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
  • Page 43: Cleaning The Impellers

    Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers for the machine to work Check if the holes on the upper impeller (1) efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller.
  • Page 44: Troubleshooting

    Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
  • Page 45 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
  • Page 46 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
  • Page 47 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
  • Page 48 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.

Table of Contents