Table of Contents
Advertisement
AFTER USING
After washing, clean the lint and foreign objects on the lint filter and the frame, or
it will affect the next use.
Before cleaning, pull the plug out.
Clean lint filter
During washing,the lint-filter must
be used.
Be sure to clean it after use.
1.Take the filter down.
Put your hand on the groove, press
it and take it down.
2.Cleaning
When the lint is wet, put it into the
water and clean.
3.Install the filter
After cleaning, insert the filter into
the frame, and press in its upper part.
Clean the machine
Clean machine with soft cloth.
Clean with neutral detergent if is too dirty.
Never wash it directly with water.
After washing, take off the water inlet hose.
Pull out the plug, hang up the wire.
Do not keep water in wash tub for a long time.
After washing, drain immediately.
Clean the outside and inside of the machine with
soft cloth. Open upper cover and close it again
after 1 hour .
Hang up the drain hose well.
When the remained water is frozen
Prevent the freezing(after washing, drain water
completely)
After complete draining,set the program/drain
selector to the strong or standard position.
If it is on the drain position, ice is hard to melt
When the water is frozen.
Pour water below 50 degree into wash tub to
soak.Then turn the pulsator with your hands
gently until it can drain, After that,you can use it
again.
8
C
2-3 L
Advertisement
Table of Contents
