Acer PL7610T Series User Manual page 35

This function is especially suitable for gaming environment. It
reduces input to output latency and helps create a seamless
experience.
Low Input Lag
Security
This projector provides a useful security function for the
administrator to manage the projector.
Press
function is enabled, your must enter "Administrator
Password" first before changing the security setting.
•
•
Security
Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
•
•
•
•
•
This function is only available for certain input timings.
After turned on, performing Auto Keystone or
adjusting the following settings will deactivate this
function: Aspect ratio, Keystone, H. Position, V.
Position, Frequency, HDMI Scan Info, Digital Zoom.
When Display Mode is Game Dark or Game Bright, this
function will be automatically turned on.
to change the "Security" setting. If the security
The factory default of "Administrator Password" is
"1234".
Select "On" to enable the security function. You have to
enter password depending on the "Security Mode".
Please refer to "User Password" section for details.
If "Off" is selected, you can switch on the projector
without password.
Press to select timeout duration.
The range is from 10 to 990 minutes.
When time is up, the projector will request you to enter
the password again.
The factory default setting of "Timeout (Min.)" is "Off".
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.
25