Rocking Your Vehicle To Get It Out; Loading Your Vehicle - Chevrolet 2008 Express Owner's Manual

Rocking Your Vehicle to Get It Out

First, turn the steering wheel left and right to
clear the area around the front wheels. Turn off
any traction or stability system. See StabiliTrak
System on page 4-5. Then shift back and forth between
REVERSE (R) and a forward gear, spinning the
wheels as little as possible. To prevent transmission
wear, wait until the wheels stop spinning before shifting
gears. Release the accelerator pedal while you shift,
and press lightly on the accelerator pedal when
the transmission is in gear. By slowly spinning the
wheels in the forward and reverse directions, you will
cause a rocking motion that could free your vehicle.
If that does not get your vehicle out after a few tries, it
might need to be towed out. If your vehicle does
need to be towed out, see Towing Your Vehicle on
page 4-25.
4-20

Loading Your Vehicle

It is very important to know how much weight your
vehicle can carry. This weight is called the
®
vehicle capacity weight and includes the weight of
all occupants, cargo, and all nonfactory-installed
options. Two labels on your vehicle show how
much weight it was designed to carry, the Tire
and Loading Information label and the
Certification/Tire label.
CAUTION:
{
Do not load your vehicle any heavier than
the Gross Vehicle Weight Rating (GVWR),
or either the maximum front or rear Gross
Axle Weight Rating (GAWR). If you do,
parts on your vehicle can break, and it
can change the way your vehicle handles.
These could cause you to lose control
and crash. Also, overloading can shorten
the life of your vehicle.