Thermaltake Pacific PR32-D5 Plus Quick Start Manual

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.
Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !
A x 1
Pump & Reservoir
I x 1
Controller
1
A
B
F
D
There are two types of mounting kits, please choose
the mounting kit you want to use.
B x 1 C x 1
Clip
Bracket
J x 1
Controller Cable Power Cable

Installation Guide

or
B
D
E
Pacific PR32-D5 Plus

Parts List

D x 4 E
Long Screws
Nuts
K x 4 L x 1
Conversion cable
F
E
Pump+Reservoir
x 4 F x 4 G x 1
G1/4 Stop Plug
Short Screws
M x 1
Bridge Cable
2
Install your fittings and
tubes, remember to use
the bottom as an outlet
and top as an inlet.
Connect the reservoir
cable to the conversion
cable.
Support
16.8
Million Colors
H x 1
Wrench
N x 1
Velcro
3
L