Table of Contents
Advertisement
MICROWAVE/ WALL OVEN COMBINATION
6. Install the Anti-tip Mounting Screws
The wall oven can tip when the door is
open. The anti-tip mounting screws supplied with the
wall oven must be installed to prevent tipping of the
wall oven and injury to persons.
A. The mounting holes in the side trims may be
used as a template to locate the appliance mounting
screw holes (see figure 6).
B. Use the two screws supplied to fix the appliance
to the cabinet.
Figure 6
Tip Over Hazard
• A child or adult can tip the oven
and be killed.
• Install the anti-tip device to oven
and/or structure per installation
instructions.
• Ensure the anti-tip device is re-engaged when the
oven is moved.
• Do not operate the oven without the anti-tip device
in place and engaged.
• Failure to follow these instructions can result in
death or serious burns to children and adults.
Anti-tip mounting holes
INSTALLATION INSTRUCTIONS
Refer to the installation
instructions supplied with your
appliance for proper installa-
tion.
Check for proper installation
with a visual check that the
anti-tip screws are present.
Test the installation with light
downward pressure on the
open oven door. The oven
should not tip forward.
7. Adjust Microwave Front Frame Screws
Use a manual screwdriver to adjust the screws
on the microwave front frame for a flush fit (see
figure 7).
micro-
ADJUST
SCREWS
wave
AJUSTAR LOS
TORNILLOS
front
AJUSTER
LES VIS
frame
screws
align
micro-
wave
frame
front to
back
5
Figure 7
Advertisement
Table of Contents
