Tip Over Hazard - Frigidaire FFEW2426US Installation Instructions Manual

ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
6 Install the Anti-tip Mounting Screws
The wall oven can tip when the door is
open. The anti-tip mounting screws supplied with the
wall oven must be installed to prevent tipping of the
wall oven and injury to persons.
A. The mounting holes in the side trims may be
used as a template to locate the appliance mounting
screw holes (see figure 5).
B. Use the two screws supplied to fix the appliance
to the cabinet.
Anti-Tip Mounting Holes
Figure 5

Tip Over Hazard

• A child or adult can tip the oven
and be killed.
• Install the anti-tip device to oven
and/or structure per installation
instructions.
• Ensure the anti-tip device is re-engaged when the
oven is moved.
• Do not operate the oven without the anti-tip device
in place and engaged.
• Failure to follow these instructions can result in
death or serious burns to children and adults.
Anti-tip mounting holes
Refer to the installation
instructions supplied with your
appliance for proper installa-
tion.
Check for proper installation
with a visual check that the
anti-tip screws are present.
Test the installation with light
downward pressure on the
open oven door. The oven
should not tip forward.
7 Install the Bottom Trim
Bottom trim must be installed for the
oven to function properly. DO NOT operate the oven
without bottom oven trim installed. Do not use wood
or any other trim that is not manufactured for use
with this model. Operating the appliance without
manufacturer's bottom trim properly installed may
cause personal injury and may damage cabinetry or
the appliance.
Screws to attach the bottom trim are supplied with
the oven. Oven door may be removed to aid bottom
trim installation.
A. Place the top of the bottom trim over the side trim
tabs on each side of the oven below the oven door.
B. Attach the trim using the provided screws (see
Figure 6).
Screws
supplied
5
Bottom Trim
Figure 6