Table of Contents
Advertisement
[REC] Mode:
Useful Functions at Travel Destinations
Recording which Day of the Vacation You Take the Picture
For details on the [SETUP] menu settings, refer to P55.
If you set the departure date or the travel destination of the vacation in advance, the
number of days that have passed since the departure date (which day of the vacation it is)
is recorded when you take the picture. You can display the number of days that have
passed when playing back the pictures and stamp it on the recorded pictures with [TEXT
STAMP] (P145).
•
The number of days that have passed since the departure date can be printed out using the
"PHOTOfunSTUDIO 6.0 BD Edition" bundled software on the CD-ROM (supplied).
•
Select [CLOCK SET] to set the current date and time in advance. (P31)
1
Select [TRAVEL DATE] from the [SETUP] menu, and then press 1.
2
Press 3 to select [TRAVEL SETUP] and then press 1.
3
Press 4 to select [SET] and then press [MENU/SET].
4
Press 3/4/2/1 to set the departure date (year/month/day),
and then press [MENU/SET].
5
Press 3/4/2/1 to set the return date (year/month/day),
and then press [MENU/SET].
•
If you do not want to set the return date, press [MENU/SET] while
the date bar is displayed.
6
Press 4 to select [LOCATION] and then press 1.
7
Press 4 to select [SET] and then press [MENU/SET].
8
Enter the location.
•
For details on how to enter characters, refer to
9
Press [MENU/SET] twice to close the menu.
•
The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date is
set.
•
When the travel date is set, [—] appears on the lower right of the screen.
∫ Cancelling the travel date
The travel date is automatically cancelled if the current date is after the return date. If you
want to cancel the travel date before the end of the vacation, select [OFF] on the screen
shown in step
3
or
3
[OFF] in step
, [LOCATION] will be also set to [OFF].
Note
•
The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] (P116) to the travel destination, the travel date is calculated using the
date in the clock setting and the travel destination setting.
7
and then press [MENU/SET] twice. If the [TRAVEL SETUP] is set to
"
"
Entering Text
on P117.
Recording
115
VQT3A48
Advertisement
Table of Contents
