Cleaning And Maintenance - Swann activair SAC16870N Manual

Table of Contents

Advertisement

A. MAINTENANCE OF THE APPLIANCE:
Before any maintenance and cleaning operation, it is ESSENTIAL to disconnect
the power cable from the mains for safety reasons.
Do not use chemicals or detergents for cleaning or maintenance of the appli-
ance. This could damage your device.
The outside of the air conditioner can be cleaned with a slightly damp cloth.
B. DRAIN THE APPLIANCE:
To empty your device, put a container under the
cap to collect water.
Unscrew the drainage cover and unplug the
water plug to let the water out.
Once all the water has drained, stuff the plug
and tighten the drainage cover.
C. MAINTENANCE OF THE AIR FILTER:
For best efficiency, the air filter should be cleaned after 100 hours of use.
• Turn off the device and unplug the power cable
• Unscrew the middle screw and remove the air filter.
• Clean and reinstall the air filter. If the filter is very dirty, wash the filter in warm,
soapy water, then rinse and dry before putting it back in place.
• Tighten the middle screw.
• Note : When using the air conditioner
in an extremely dusty environment,
clean the air filter every 2 weeks.
SAC16870N_IM.indd 13

CLEANING AND MAINTENANCE

13
27/03/2020 11:11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents