Operation - Swann activair SAC16870N Manual

This length of the hose has been taken into account in the technical speci cations of
the air conditioner. Therefore, never use an extension hose.
1. POWER:
The button "POWER" on the control panel or on the remote control can be used
to turn the unit on or put it to standby. In standby mode, the display shows the
room temperature. When the unit is switch on, the display shows the target tem-
perature.
2. "SLEEP"
To activate sleep mode while the unit is in COOLING mode, press the Sleep button
on the control panel or remote control. The fan speed will automatically be set to
the lowest speed. The temperature will increase by 1C after the first hour of opera-
tion, then by 1C after the 2nd hour. This temperature will be maintained during the
hours of operation of the appliance.
Note :
The Sleep mode setting is only available in cooling mode.
SAC16870N_IM.indd 10
INSTALLATION

OPERATION

HIGH LOW
TIMER SPEED UP
7 6 5
COOL DRY FAN POWER FULL
DOWN MODE SLEEP POWER
4 3 2 1
10
27/03/2020 11:11