Table of Contents
Advertisement
This length of the hose has been taken into account in the technical specifications of
the air conditioner. Therefore, never use an extension hose.
1. ON / OFF:
The button on the control panel or on the remote control can be used to turn the
unit on or put it to standby. In standby mode, the display shows the room tempera-
ture. When the unit is switch on, the display shows the target temperature.
2. MODE SELECTION:
The buttons on the control panel or on the remote control allow you to select one
of the 3 modes:
• Cooling
• Dehumidification
• Fan
Select the desired mode Cooling, Dehumidification or Ventilation, by successively
pressing the MODE button on the unit or the corresponding button on the remote
control. The indicator corresponding to the selected mode lights up.
a. COOLING Mode:
The air is cooled and the hot air is exhausted to the outside through the exhaust
SAC16810N_IM.indd 10
INSTALLATION
OPERATION
10
27/03/2020 11:11
Advertisement
Table of Contents
