Lights; Vacation And Moving - Haier HRF15N3BGF Installation And User Manual

1. Unplug refrigerator or disconnect power.
2. Clean the interior. Hand wash, rinse, and dry removable
parts and interior surfaces thoroughly. Use a clean
sponge or soft cloth and a mild detergent in warm water.
WARNING
Broken Glass Hazard
Do not hit refrigerator glass doors.
Protect glass surface and edges during installation or
removal of doors.
Failure to do so can result in serious eye injury or minor
cuts.
3. Clean the exterior surfaces.
For painted metal, glass and stainless steel finishes:
•
Wash surfaces using a clean, soft cloth or sponge,
and a solution of mild detergent and warm water.
•
Rinse surfaces with clean, warm water, and then dry
immediately with a soft cloth to avoid water spots.
NOTE:
•
If cleaning a model with glass door panels, do
not hit the glass with pots, pans, furniture, toys,
or other objects. Scratching, hitting, jarring or
stressing the glass may weaken its structure,
causing an increased likelihood of breakage at a
later date.
•
Paper towels scratch and may dull a painted
finish. To avoid possible damage, use only soft,
clean cloths to polish and wipe the door.
•
When cleaning stainless steel, always wipe in the
direction of the grain to avoid cross-grain
scratching.
4. Plug in refrigerator or reconnect power.

LIGHTS

The interior lights of the refrigerator turn off when the doors
are open for longer than 7 minutes.
IMPORTANT: Your refrigerator is equipped with LED
lighting. These lights are designed to last for the life of
your refrigerator. However, if the lights stop operating,
please contact a qualified technician for replacement.

VACATION AND MOVING

VACATION
If You Choose to Leave the Refrigerator On While You're
Away:
• Use up any perishables and freeze other items.
If You Choose to Turn Off the Refrigerator Before You
Leave:
1. Remove all food from the refrigerator and freezer.
2. Unplug refrigerator or disconnect power.
3. Clean refrigerator. Rinse and dry thoroughly.
4. Tape rubber or wood blocks to the top of the lid or
door(s) to allow air to circulate inside. This stops odor
and mold from building up.
MOVING
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all frozen
food in dry ice.
2. Unplug refrigerator.
3. Clean refriigerator. Rinse, and dry thoroughly.
4. Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the
move.
5. Raise the leveling legs so they don't scrape the floor.
See "Leveling."
6. Tape the doors closed and tape the power cord to the
back of the refrigerator. When you get to your new
home, see "ReInstalling/Using Refrigerator Again" to
prepare the refrigerator for use.
10