Specifications - Makita BO4558 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Pad size
Orbits per minute (min
Dimensions (L x W x H)
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BO4555
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
BO4555
-1
)
131 mm x 112 mm x 142 mm
equipment and
) : 80 dB(A)
pA
BO4556
112mm ×102mm
14,000
131 mm x 112 mm x 141 mm
1.1 kg
END201-5
The noise level under working may exceed 80 dB (A).
Model BO4556
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model BO4557
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BO4558
its
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
ENE052-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BO4555
ENF002-1
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BO4556
Work mode : sanding metal plate
Vibration emission (a
ENG905-1
Uncertainty (K) : 1.5 m/s
Model BO4557,BO4558
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
2
BO4558
1.2 kg
/II
) : 82 dB(A)
pA
) : 93 dB(A)
WA
) : 76 dB(A)
pA
) : 79 dB(A)
pA
Wear ear protection
) : 2.5 m/s
h
2
) : 3.0 m/s
h
2
) : 3.5 m/s
h
2
BO4557
131 mm x 112 mm x 137 mm
1.0 kg
ENG900-1
2
or less
2
2